# Agar Ag04 (Film, with Plasticizer) Ingredients: * Water (50 mL) * Agar agar powder (1 g) * Glycerol (1.5 g) Procedure: * Mix all the ingredients into a pan or pot * Heat up all the ingredients to 85-90 C on the stove * Mix thoroughly * Lower heat if bubbles are forming on the bottom of the pan * Take off heat after about 4 minutes of stirring or until the agar is fully dissolved (the solution is at least 85 C and thicker than when started) * Let dry for a few days on a smooth surface such as glass or silicone * Done! Properties: * Before drying: like a very thin colorless syrup that's almost milky * During drying: like a wet and stretchable film Notes: * I forget where this one is lol Base recipe: * --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://nicholsonlabs.gitbook.io/labs/bioplastic/recipes-refined-seaweed/agar-ag04-film-with-plasticizer.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.