> For the complete documentation index, see [llms.txt](https://nicholsonlabs.gitbook.io/labs/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://nicholsonlabs.gitbook.io/labs/bioplastic/recipes-refined-seaweed/agar-ag07-foam-with-plasticizer.md). # Agar Ag07 (Foam, with Plasticizer) ![](/files/Rp16jdO7RgOfHMt3oOWG) Ingredients: * Water (40 mL) * Agar agar powder (1 g) * Glycerol (2 g) * Dish soap (3g) Procedure: * Mix all the ingredients into a pan or pot * Heat up all the ingredients to 85-90 C on the stove * Mix thoroughly * Lower heat if bubbles are forming on the bottom of the pan * Add dish soap * Whisk until you see it foam * Take off heat after about 4 minutes of stirring or until the agar is fully dissolved (the solution is at least 85 C and thicker than when started) * Let dry for a few days on a smooth surface. Expect extreme shrinkage. * Done! Properties: * Before drying: not very foamy at all * After drying: lorem ipsum Notes: * This did not foam. I will try a different dish soap next time, or more of it. Base recipe: *